Bracketing

12-0013

Versatile magnet base with On/Off function and many optional rod mounting possibilities.

Three sides are magnetic.

D, E

12-0045

Versatile magnet base with On/Off function and 360° turnable head with two rod mounting possibilities.

D, E

12-0742

Tilt table for use with an ES-unit as transmitter, e.g. with the Twist measurement program. This tilt table simplifies and makes the rough alignment of the laser beam quicker. Use the EM-unit as detector, mounted on a regular magnet base.

Magnet base and rods included as pictured.

D, E

12-0413

For axial mounting on flanges or shafts. With M6 screws working as radial supports, and four super magnets.

D, E

12-0412

For use for example when the space between coupling and machine is limited. Width: 12 mm [0.5”].

Includes thin chains and tightening tool.

D, E

01-1165

Allows axial displacement between measuring units to be able to rotate past projecting machine parts. For both E and D series.

2 screws M6x14 also needed (Part No. 03-0061). V-bracket and rods not included.

D, E

12-0039

For shaft alignment. The spherical feet can be placed in two different positions for adaption to small or large shaft diameters. Used when the shafts cannot be rotated. Mounted with standard chains (not included).

D, E

12-0615

For alignment of cardan/offset mounted machines.

Delivered in plastic case. For E-series.

E

12-0059

Stainless steel. Diameter 10 mm. Extendable. Plastic holder included.

4 pcs.

D, E

12-0324

Stainless steel. Diameter 10 mm. Extendable. Plastic holder included.

8 pcs.

D, E

12-0060

Stainless steel. Diameter 10 mm. Extendable. Plastic holder included.

4 pcs.

D, E

12-0885

Accessories for roll diameter 400–1300 mm [15.7–51.2”].

E

12-0901

For using the E290 Precision Level on diameters 55–800+ mm [2.16–31.50+ “].

Includes 2 legs, 4 magnets and mounting screws.

E

12-0767

For detector E8/E9. With slidable target. For mounting of the detector on regular rods with 40 mm centre-to-centre distance. Can be used on Slide bracket 12-0768 or any other suitable bracket.

Detector not included.

E

12-0455

For bore straightness measurement. With magnetic feet. For bores Ø120–250 mm [4.72”–9.84”].

D, E

12-0543

For bore straightness measurement. With magnetic feet. For bores Ø200–350 mm [7.87”–13.78”], width Min. 80 mm [3.15”].

D, E

12-0510

For bore straightness measurement. With magnetic feet. For bores Ø300–500 mm [11.81”–19.68”], width Min. 100 mm [3.94”].

D, E

12-0628

For attachment of laser transmitter D22 or D23 outside flange, on non-magnetic flanges

E

12-0787

Bracket for use with an ES-unit as laser transmitter. Clamping pin Ø 20 mm [0.79“], clamping length 40 mm [1.57“]. It is also possible to turn the measuring unit to point the laser beam through the pin. This is for example useful when aligning bar feeders.

Rods and measuring unit not included.

E

12-0568

Accessory mounting pin for laser transmitter D146. Makes it possible to point the laser beam into e.g. the chuck. Clamping Ø20 mm [0.79”].

D, E

12-0341

For sterntube measurement. Smallest diameter 250 mm [9.84”]. Includes extension beams and rods for diameters up to 1200 mm [47.24”].

No detector included.

D, E

12-0709

Makes it possible to mount a measuring unit in front of the angular prism D46. Used for precision aligning the prism.

D, E