Ancillaries
- Low friction guiding system
- Phosphor bronze nut and safety device
- Irreversible lifting nut and screw technology
- Full synchronization control system
- Low and high limit switch
- Emergency stop on each column
- Dead man type Up & Down push buttons
- Dust-water protection level IP 55
- Full certification
- Australian Queensland's certification
- GOST certification (Madi-Fond, Russie) Product
Remote control (reference BL RC)
Remote control with 10 meters long-cable to pilot the lift from the master column in "all" mode. Only available for easy range
Plastic cover protection (reference BL PC)
Set of 4 Plastic cover protection for intensive use in wash bays
Jacking unit (reference BL HD)
Set of 4 hydraulic palette jack "Deadman" type. Only available for easy range
Van's adaptor (reference BL FRV 01)
Set of 4 fork reducer for vans
- Capacity 4.8 tonnes -
Fit to wheel diameter 600 to 930 mm
Car's adaptor (reference BL FRC 01)
Set of 4 fork reducer for cars
- Capacity 2 tonnes -
Fit to wheel diameter 500 to 730 mm
Trailer beam (reference BL LB 02)
Lifting beam for trailer
maximum capacity: 3 x 5 tonnes
Lifting beam (reference BL LB 01)
Lifting beam for bus & coach maximum capacity:
2 x 6 tonnes
Transmission jack
1.5t capacity, swivel head movable in every directions (6 dimensions)
A must equipment to be used in combination with columns to quickly change transmissions in totally safe conditions
14 t small axle stand (reference BL 140)
Mini/maxi: 300 – 445 mm
5 positions
14 t small axle stand (reference BL 141)
Mini/maxi: 450 – 730 mm
8 positions
14 t small axle stand (reference BL 142)
Mini/maxi: 685 – 1125 mm
12 positions
6 t tall axle stand (reference BL 060)
Mini/maxi: 1130 – 1840 mm
10 positions
10 t tall axle stand (reference BL 100)
Mini/maxi: 1380 – 2100 mm
10 positions
15 t tall axle stand (reference BL 150)
Mini/maxi: 1385 – 2025 mm
10 positions
Spring loaded / with screw at the top
Transmission jacks
1.5 t capacity, with multi-position swivel head (6 axles). Essential ancillary to SEFAC mobile columns for quick and safe replacement of drive components.
Cover set
Protection of columns in aggressive environment.
Fork adaptators
for commercial or private vehicles allowing a safety adjustment to the diameter of the tyres.
Stands
with spring for easy blocking and screwed head for accurate adjustment.
Low-profile beam
to lift the vehicles by the chassis.
Trailer beam
Lifting solution for truck trailers.
Plastic cover set
Protection of columns in aggressive environment.